How To Mount Your Mcm275 Onto Walls - Philips MCM275/93 User Manual

Appendix
How to mount your MCM275
onto walls
IMPORTANT!
– The wall mounting instructions are for
the use of the qualified wall mounting
person only!
– Ask a qualified person to help you
with the wall mounting, which includes
drilling holes on the wall and
mounting the set onto
What's in the supplied mounting kits
140 mm (5.51")
What else you'll need
– Drilling tools (e.g. electric drill)
Preparation
1
To find a suitable location for mounting, try
your necessary rear connections (see
the chapter Installation).
2
Ask a qualified person to help you with the
wall mounting, who should:
– to avoid unexpected damage, learn about the
piping, wiring and other relevant information
inside your walls;
– according to the drilling requirements, choose
suitable drilling tools;
– take other precautions necessary for the wall
mounting work.
28
walls.
1 x template
(Wall mounting
instructions)
2 x screws
Mounting your MCM275
1
Align the template in the chosen location on a
wall. Use a pencil to mark the drilling positions
(as shown)
2
Drill two 6mm diameter holes as marked
3
Secure the dowels and screws in the holes
respectively, leaving the screws 5mm proud of
the wall
4
To detach the stand,
a. As shown, hold down the 3 PRESS buttons
b. Move out the stand to detach
5
Hang the unit on the fastening screws
6
As shown, hook and mount the speakers in
place
140 mm (5.51")
PRESS PRESS