Prepare
Setting the clock
1
In the standby mode, press and hold DISPLAY/CLOCK on the remote control
24 HR or 12 HR appears for the initial clock setting. To select 12-hour clock or
24-hour clock,
a. Press VOLUME +/- once or more
b. Press DISPLAY/CLOCK to confirm
The hours digits start flashing
2
Hold down or press VOLUME +/- repeatedly to set the hours
3
Press DISPLAY/CLOCK to confirm
4
Hold down or press VOLUME +/- repeatedly to set the minutes
5
Press DISPLAY/CLOCK to confirm
Enjoy
Playing discs
With this system, you can play all pre-recorded audio CDs (CDDA), all finalized audio CD-Rs
and CD-RWs, MP3/WMA-CDs (CD-Rs/CD-RWs with MP3/WMA files)
1
Press SOURCE once or more to select CD (or CD on the remote control)
2
Press CD OPEN•CLOSEç to open the CD compartment
3
Insert a disc with the printed side facing up. Press CD OPEN•CLOSEç again
to close the compartment
4
Press ÉÅ to start playback
5
To stop playback, press STOPÇ
/
USB
IMPORTANT!
– Remove the
protective
plastic tab
before using
the remote
control
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source
select keys on the remote control (DISC
or TUNER, for example).
– Then select the desired function
( 2;, 4 , ¢ for example).
/
USB