STANDBY-ON
SOURCE
BAND
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
●
Press STANDBY -ON (y on the remote
control).
➜
The system will switch to the last selected
source.
●
Press SOURCE (CD, TUNER or AUX on
the remote control).
➜
The system will switch to the selected
source.
To switch the system to standby mode
●
Press STANDBY -ON (y on the remote
control).
➜
The clock is displayed.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a CD playback has
ended and no control is operated.
-
PROG/CLOCK
VOLUME
+
TUNING
Basic Functions
Adjusting volume and sound
1
Press VOLUME – /
volume.
➜
Display shows the volume level
number from 0-32.
2
Press DSC repeatedly to
select the desired sound effect:
JAZZ / POP / CLASSIC /
ROCK.
3
Press DBB (on the remote control) to switch
bass enhancement on or off.
➜
Display shows:
DBB
4
Press MUTE on the remote control to stop
sound play-back instantly.
➜
Playback will continue without sound and
the display shows MUTE .
●
To start sound playback you can:
– press MUTE again;
– adjust the volume controls;
– change source.
+
to increase or decrease
and a
VOLUME
DBB
DSC
if the DBB is activated.
11