Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • When using electrical appliances basic safety precautions should always be followed. • Check that the voltage indicated on the rating plate corresponds with that of the local network before connecting the appliance to the mains power supply.
PRODUCT OVERVIEW Figure 1 Rear Panel INSTALLATION The speakers come complete with wall mount brackets. Care should be taken with any commercial use installation to comply with local guidelines and legislation from relevant local authorities. The fixing’s and wall should be sufficient to support a 10:1 safety factor (ie l0x the static weight of the speaker).
WARNING: Use only the hand wheels provided to attach the speakers to the wall mounting brackets. The use of longer bolts may contact live internal circuitry and the danger of causing electric shock and damage to the speaker. OPERATION Refer to Fig 1 Rear Panel Bass Control The bass control gives the installer the ability to cut or boost the bass (Lo) frequencies (centred at 80Hz).
Power Indicator This will illuminate green when the system is switched on and is connected to the mains supply. Should this light fail to illuminate this should indicate an issue with either the system or the mains supply. Signal Indicator (Right) The signal indicators illuminate and flash green to show the presence of an input signal.