FEATURES
GALVANIC ISOLATION
Designed with galvanic isolation the input signals are kept completely separate from each other.
This prevents problems with floating grounds and the two separate ground potentials for data and
audio.
• Signal switching is made with a mechanical relay.
• The data ground signal is switched with a mechanical relay.
• The analog ground signal is switched with a mechanical relay.
• Digital data signal flow via a galvanic isolating optocoupler.
LOSSLESS POWERLINK AUDIO PASS
The PowerLink audio signals pass without any modification; the output of the is the same as the
input.
DATALINK PASS
When the PowerLink source is active, any DataLink signals herein are passed directly to the
output.
www.oneremote.dk
5