Bissell Powerlifter Swivel Pet 2260 Series User Manual page 5

Assembly
The only tool you will need to assemble your vacuum is a
Phillips-head screwdriver.
1
Place the
Upper Handle
onto the base
and push it
down. Then
attach the
handle with
the 2 screws
taped to the
Handle in a
plastic bag.
4
Wrap hose up and around
the Hose Wrap on the
Handle. Slide end of hose
into vacuum base.
Now, put your accessory tools on the vacuum and you're ready to go!
7
Pet Hair Eraser® Tool
NOTE: The Powerfoot will not suction properly unless the hose is firmly attached.
Certain trademarks used under license from The Procter & Gamble Company or its affiliates.
2
Insert the Lower Cord
Wrap and turn it to the
right to lock in place.
5
To install the optional
Febreze Filter, press the
tank release button and
pull tank from vacuum. Lift
tab to access and remove
Foam Filter from lid.
Pet TurboEraser® Tool
3
Insert the Stretch Hose
end into the back of the
vacuum and twist right to
lock in place.
6
Replace Foam Filter with
Febreze Filter. Close tank
lid. Place tank back on
vacuum and press firmly
until you hear a "click".
Extension Wand
(Crevice Tool stores inside)
www.BISSELL.com
click
5