Preparations
Rear connections
The type plate is located at the rear of the
system.
A A A A A
Power
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
– If your system is equipped with a Voltage
Selector, set the VOLTAGE SELECTOR to match
the local power line.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
FM wire antenna
Speaker
(right)
MW loop antenna
AC power cord
B B B B B
Antennas Connection
MW antenna
1
Unfold the loop antenna and if necessary, use
screws (not supplied)to fix it to a flat, hard and
stable place:
1
2
Fit the plug of the loop antenna to MW
ANTENNA as shown above.
3
Adjust the antenna for optimal reception
FM Antenna
It is unnecessary to connect the FM pigtail
antenna since it is fixed to the main unit.
●
Position the antenna as far as possible from a TV,
VCR or other radiation source.
Speaker
(left)
2
4