Table of Contents
Advertisement
Troubleshooting
The remote control does not function.
The display is dark.
Low hum or buzz sound.
Low bass response.
Unable to select Progressive Scan
No sound and picture
Some files on the USB device are not
displayed.
"DEVICE NOT SUPPORTED" scrolls on the
display.
38
✔
Select the correct source (DISC or TUNER, for
example) before pressing the function button.
✔
Point the remote control at the remote sensor
of the unit.
✔
Reduce the distance to the player.
✔
Remove any possible obstacles.
✔
Replace the batteries with new ones.
✔
Check that the batteries are loaded correctly.
✔
Press DIM again.
✔
Place the DVD micro system as far away as
possible from electrical devices that may be
causing interference.
✔
Check all speakers for correct polarity.
✔
Check that the output of the video signal is
switched to 'Pr/Cr Pb/Cb Y'.
✔
Check that the RGB/SCART cable is connected
to the correct device (See Connecting TV).
✔
Check if the number of folders exceeds 99 or
the number of titles exceeds 999.
✔
Remove the USB mass storage device or select
another source.
Advertisement
Table of Contents
