Aux; Aux (Listening To An External Source) - Philips MCM277/12 User Manual

USB
1
Check the USB device has been properly
connected. (See Installation: Connecting an
additional appliance)
2
Press SOURCE once or more to select USB
(or USB on the remote control)
➜
The icon
– NO AUDIO appears if no audio file is found in
the USB device
3
Play the USB's audio files as you do with the
albums/tracks on a CD (See CD)
Note:
– For compatibility reasons, the album/track
information may differ from what it is displayed
through flash players' music management software.
– File names or ID3 tags will be displayed as --- if
they are not in English.
24
P001-P029_MCM277_22_Eng
1
appears
2
3
4
5
24
AUX (Listening to an external
source)
You can listen to the sound of the connected
external device through your MCM277
Check the external device has been properly
connected (See Installation, Connecting an
additional appliance)
Press SOURCE once or more to select AUX
(or AUX on the remote control)
To avoid noise distortion, turn down the volume
on your external device
Press the PLAY key on the connected device to
start playback
To adjust the sound and volume, use the sound
controls on your external device and the
MCM277
2007.12.27, 16:32

AUX