Installing The Hard Drive; Removing The Solid-State Drive (Half-Length) - Dell Precision 5510 Owner's Manual

5. Remove the data-cable connector [1] and then slide out the two end brackets [2].

Installing the Hard Drive

1. Replace the hard-drive covers on the hard drive.
2. Connect the hard-drive interposer to the hard-drive assembly.
3. Place the hard-drive assembly on the palm-rest assembly.
4. Connect the hard-drive cable to the system board.
5. Align the screw holes on the hard-drive cage with the screw holes on the hard-drive assembly.
6. Replace the screws that secure the hard-drive cage to the palm-rest assembly.
7. Install the:
a) battery
b) base cover
8. Follow the procedures in After Working Inside Your Computer.

Removing the Solid-State Drive (half-length)

1. Follow the procedures in
2. Remove the:
a) base cover
b) battery
10 Extracción e instalación de componentes
Before Working Inside Your Computer.