Epson EMP-8300 Setup Manual page 21

Setting up EasyMP.net
3
Enter a projector name in the "Projector Name" field using the on-
screen keyboard.
The easiest way to identify a projector is by giving it a name containing the
installation location, an ID number or other useful information.
The projector name should consist of no more than 15 characters, numbers or
the "-" character. The name cannot comprise only of numbers but can comprise
of numbers and a "-" character.
4
Select "OK" and press the [Enter] button.
A confirmation message will appear.
5
Select "OK" and press the [Enter] button.
(When you cancel the current setup, select "Cancel" and press the [Enter]
button.)
The projector will restart after several minutes.
20