Contents 1 Important Safety Hearing safety Notice 2 Your Micro Hi-Fi System Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Get started Connect speakers Connect FM antenna Connect power Prepare the remote control Set clock Turn on Switch to standby mode...
1 Important Safety Know these safety symbols This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
m Unplug this apparatus during lightning storms or when unused for long periods of time. n Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain...
Notice Any changes or modifi cations made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Environmental information All unnecessary packaging has been omitted.
2 Your Micro Hi- Fi System Congratulations on your purchase, and welcome to Philips! To fully benefi t from the support that Philips offers, register your product at www.Philips.com/welcome. Introduction With this unit, you can: • enjoy music from audio discs and USB devices directly •...
• Connect headphones. b STANDBY-ON • Turn on the apparatus; switch to standby mode. c MP3 LINK • Jack for an external audio device. d OPEN/CLOSE • Open or close the disc compartment. e DBB • Turns on or off dynamic bass enhancement.
Page 9
• Turn on the apparatus; switch to standby mode. b Source selection keys ( CD , USB , FM , AUX/MP3 LINK ) • Select a source: CD/MP3, USB, TUNER (FM) or AUX (MP3 link). c SLEEP • Set the sleep timer. d TIMER •...
Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your unit. The model number and serial number are on the bottom of your unit. Write the numbers here: Model No.
Connect the power cord to the AC~ jack on the main unit. Connect the power plug to the wall outlet. Prepare the remote control Caution • Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi...
4 Play disc/USB Play from disc Press CD to select the CD source. Press OPEN/CLOSE . The disc tray opens. » Place a disc onto the tray and press OPEN/CLOSE . Ensure that the label is facing upwards. » Play starts automatically. •...
5 Control play Skip to a track For CD: Press / to select another track. • To select a track directly, you can also press a key on the numerical keypad. • To enter a 2 or 3-digit number, press then enter the number.
Page 14
Press / to select a track number to program, then press PROG to confi rm. • To select a track in an MP3 disc or USB device, fi rst press PRESET/ ALBUM +/- to select the album where the track is located. •...
6 Adjust volume level and sound effect Note • You cannot use the DSC, DBB and Loudness features at the same time. Adjust volume level During play, press VOL +/- to increase/ decrease the volume level. Select a preset sound effect During play, press DSC repeatedly to select: [ROCK] (rock)
7 Tune to FM radio stations Ensure that you have connected and fully extended the supplied FM antenna. Press FM . Press and hold When [SEARCH] (search) is displayed, release the button. The FM tuner tunes to a station with »...
8 Use more of your unit Set the alarm timer Ensure that you have set the clock correctly. In standby mode, press and hold TIMER . The hour digits are displayed and begin » to blink. Press + VOL - to set the hour. The minute digits are displayed and »...
9 Product information Note • Product information is subject to change without prior notice. Specifi cations Amplifi er Rated Output Power 2X25W RMS Frequency Response 20 -20000 Hz, -3dB Signal to Noise Ratio >65dB Aux Input 0.5 V RMS 20kohm Disc Laser Type Semiconductor...
• USB fl ash memory (USB 2.0 or USB1.1) • USB fl ash players (USB 2.0 or USB1.1) • memory cards (requires an additional card reader to work with this unit) Supported formats: • USB or memory fi le format FAT12, FAT16, FAT32 (sector size: 512 bytes) •...
If the problem remains unsolved, go to the Philips web site (www.Philips.com/support). When you contact Philips, ensure that your unit is nearby and the model number and serial number are available . No power •...