Operation - Siemens Sitraffic Sensus Unit C3077 Instruction Manual

Sitraffic Sensus Unit
Instruction Manual

10 Operation

Danger of accident!
Do not try to handle the Sitraffic Sensus Unit while driving.
Switching on the Sitraffic Sensus Unit
The Sitraffic Sensus Unit does not have a power on or off switch. By connecting the
8
Sitraffic Sensus Unit to the power supply it starts to operate and shows the battery
symbol in the upper right of the display. In case the Sitraffic Sensus Unit is already
connected it starts:
• when the ignition is turned on or
• when the vehicle starts to move.
Sitraffic Sensus Unit in operation
4 FR AB-063-AK
TEXT AB-0123
2
TPL TIS VIA
HU-GO
Selecting the number of axles
Before starting a trip on the tollable road network you have to set the proper
10
number of axles, if it differs from initial declaration. The initial configuration
and activation of the device is done by the after-sales service of your operating
company.
Please check if the information shown on the display is correct (e.g. license plate
number, number of axles).
At the beginning of this manual you can find an overview of changing the number
of axles (2, 3, ... 14 axles), whereas the settings have to be chosen according to the
legislation in force. Please contact the after-sales service of your operating company
for further information.
© Siemens Aktiengesellschaft Österreich
1
1 Number of axles
5
2 Activated toll services
6
3 Status LED
4 Licence plate number
3
5 Connection to external power supply
6 Battery status
10 Operation
15