Precautions - Yamaha HS Series Owner's Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE
PROCEEDING
Please keep this manual in a safe place for
future reference.
This product is designed for accurate sound monitoring during
audio recording, editing, mixing and other applications. Do not
use for any purpose other than as a speaker. Those who are
unfamiliar with handling or those who can not handle according to
this manual, should be supervised by responsible persons to
ensure safety.
WARNING
Always follow the basic precautions listed below to avoid the
possibility of serious injury or even death from electrical
shock, short-circuitin , dama es, fire or other hazards. These
precautions include, but are not limited to, the followin :
If you notice any abnormality
• If any of the following problems occur, immediately turn off the power
switch and disconnect the electric plug from the outlet.
- The power cord or plug becomes frayed or damaged.
- Unusual smells or smoke are emitted.
- Some object, or water has been dropped into the product.
- There is a sudden loss of sound during use of the product.
- Cracks or other visible damage appear on the product.
Then have the product inspected or repaired by qualified Yamaha
service personnel.
Power supply/Power cord
• Do not place the power cord near heat sources such as heaters or
radiators, and do not excessively bend or otherwise damage the cord,
place heavy objects on it, or place it in a position where anyone could
walk on, trip over, or roll anything over it.
• Only use the voltage specified as correct for the product. The required
voltage is printed on the name plate of the product.
• Use only the supplied power cord/plug.
If you intend to use the product in an area other than in the one you
purchased, the included power cord may not be compatible. Please
check with your Yamaha dealer.
• Check the electric plug periodically and remove any dirt or dust which
may have accumulated on it.
• Make sure to fully insert the electric plug to prevent electric shocks or
fire.
• When setting up the product, make sure that the AC outlet you are using
is easily accessible. If some trouble or malfunction occurs, immediately
turn off the power switch and disconnect the plug from the outlet. Even
when the power switch is turned off, as long as the power cord is not
unplugged from the wall AC outlet, the product will not be disconnected
from the power source.
• Remove the electric plug from the outlet when the product is not to be
used for extended periods of time.
• Do not touch the product or the electric plug during an electrical storm.
• Be sure to connect to an appropriate outlet with a protective grounding
connection. Improper grounding can result in electrical shock, fire, or
damage.
Do not open
• This product contains no user-serviceable parts. Do not attempt to
disassemble the internal parts or modify them in any way.
Water warnin /Fire warnin
• Do not expose the product to rain, use it near water or in damp or wet
conditions, or place on it any containers (such as vases, bottles or
glasses) containing liquids which might spill into any openings.
• Never insert or remove an electric plug with wet hands.
• Do not place any burning items or open flames near the product, since
they may cause a fire.
4
HS8/HS7/HS5/HS8I/HS7I/HS5I/HS8S Owner's Manual
Hearin loss
• Before turning the power of all devices on or off, make sure that all
volume levels are set to the minimum. Failing to do so may result in
hearing loss or device damage.
• When turning on the AC power in your audio system, always turn on the
product LAST, to avoid hearing loss and speaker damage. When turning
the power off, the product should be turned off FIRST for the same
reason.
CAUTION
Always follow the basic precautions listed below to avoid the
possibility of physical injury to you or others. These
precautions include, but are not limited to, the followin :
Power supply/Power cord
• When removing the electric plug from the product or an outlet, always
hold the plug itself and not the cord. Pulling by the cord can damage it.
Location and connection
• Do not place the product in an unstable position or a location with
excessive vibration, where it might accidentally fall over and cause injury.
• Keep this product out of reach of children. This product is not suitable for
use in locations where children are likely to be present.
• When installing the product:
- Do not cover it with any cloth.
- Do not install it on a carpet or rug.
- Make sure the top surface faces up; do not install on its sides or upside
down.
- Do not use the product in a confined, poorly-ventilated location.
Inadequate ventilation can result in overheating, possibly causing
damage to the product(s), or even fire. Make sure that there is adequate
space around the product: at least 20cm above, 20cm at the sides and
20cm behind.
• Do not place the product in a location where it may come into contact
with corrosive gases or salt air. Doing so may result in malfunction.
• Before moving the product, remove all connected cables.
• Do not press the rear panel of the product against the wall. Doing so may
cause the plug to come in contact with the wall and detach from the
power cord, resulting in short circuiting, malfunction, or even fire.
• (HS8I/HS7I/HS5I only)
Always consult qualified Yamaha service personnel and make sure to
observe the following precautions if the product installation requires
construction work.
- Choose mounting hardware and an installation location that can
support the weight of the product.
- Avoid locations that are exposed to constant vibration.
- Use the required tools to install the device.
- Inspect the device periodically.
Improper installation might cause accidents, injuries, damage or
malfunction of this product.
Maintenance
• Remove the power plug from the AC outlet when cleaning the product.
Handlin caution
• Do not insert your fingers or hands in any gaps or openings on the
product (ports).
• Do not rest your weight on the product or place heavy objects on it.
• Do not operate the product if the sound is distorting. Prolonged use in
this condition could cause overheating and result in fire.
About disposal
This product contains recyclable components. When disposing of this
product, please contact the appropriate local authorities.
Yamaha cannot be held responsible for damage caused by improper
use or modifications to the device.
PA_en_11