Needle Replacement; Usb Recording - Crosley T200A Instruction Manual

English

Needle Replacement

Removing Needle
1. Gently grasp the sides of the needle.
2. Pull needle away from the cartridge.
Installing Needle
1. Position the needle with its tip facing down.
2. Line up the needle with the cartridge.
3. Slide the needle onto the cartridge.

USB Recording

To record the vinyl into digital file formats such as MP3, you can use the USB
Output Jack to connect this unit to your computer's USB port and use the
recording program of your choice.
1. Use the supplied USB cable to connect the unit to your computer.
2. Turn on the power of the turntable.
3. Run the recording program of your choice.
Note:
•
In case you do not have a recording program installed, Audacity is a free software to
use, distributed under the GNU General Public License (GPL). For most updated
version of Audacity and instructions on how to use it, please visit Audacity website:
http://www.audacityteam.org/. Crosley would not carry responsibility or support for third
party software and all downloads should be carried out at user's own responsibility.
•
Depending on the operating system and software that you are using, you may need to
make some changes on settings of the operating system and/or software before
starting the recording process. As a general guideline, the recording source/input
should be set to Microphone USB audio codec. And it is recommended to set it to 2
channel, 16 bit, 48000Hz (DVD Quality)
•
Make sure the USB connection is made to the USB jack of your computer directly
instead of a USB hub to ensure a successful connection.
7