DOK-INDRV*-MLD3-**VRS*-AP02-EN-P
Rexroth IndraDrive Rexroth IndraMotion MLD (2G) as of MPx-18
1
Introduction
1.1
About this documentation
Editions of this documentation
Edition
DOK-INDRV*-MLD2-2G*VRS-AP01-EN-P
DOK-INDRV*-MLD2-2G*VRS-AP02-EN-P
Means of representation in this
documentation
What?
Important facts that should
be highlighted in the body
text
Parameter names, diagnostic
message names, function
designations
Your feedback
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Release date
2014-01
2014-08
Tab. 1-1:
Record of revisions
To make it easier to read this documentation, the table below contains the
means of representation and notations of recurring terms.
How?
Boldface
Quotation marks
Tab. 1-2:
Conventions of notation
Helpful information and tips are highlighted in the text. A symbol tells you
what kind of information is used in the text:
This box contains important information that should be taken into
consideration.
This symbol indicates useful tips and tricks.
Signal words in accordance with ANSI Z535.6-2011 draw the reader's atten‐
tion to hazards (see
bol").
Your experiences are important to our efforts in improving products and doc‐
umentation.
If you discover errors in this documentation or would like to suggest changes,
you can send your feedback to the following e-mail address:
Dokusupport@boschrexroth.de
Notes
First edition
●
Corrections
–
Information on available memory
●
Amendments:
–
WinStudio
when
(IndraControl VE*) via Ethernet
–
Description of context menu for
"Application"
–
Information:
ance level cannot be configured
when "MLD-M" system mode has
been configured for MPC
For example...
"IndraDrive Cs" provides an analog input. There is no analog
output.
In the I/O configuration (IndraWorks), the inputs were linked
to parameter "P-0-1390, PLC input WORD0".
"Explanation of signal words and the safety alert sym‐
Bosch Rexroth AG
5/267
Introduction
configuration
required
connecting
an
HMI
"Advanced"
perform‐