Tuner; Tuning To Radio Stations; Programming Radio Stations; Autostore: Automatic Programming - Philips MCM275/05B User Manual

Tuning to radio stations

1
Press SOURCE once or more to select
TUNER (or TUNER on the remote control)
2
Press TUNER on the remote control
repeatedly to select your desired waveband, FM
or MW
➜
Display shows:
frequency, waveband and if programmed, a
preset number
/
USB
3
Press and hold 4 / ¢ until SEARCH
appears
➜
The radio automatically tunes to a station
with sufficient reception. Display shows SEARCH
during automatic tuning
➜
FM: If a station is received in stereo,
shown
➜
FM: When you are receiving an RDS station,
is shown
4
Repeat step 3 if necessary until you find the
desired station.
● To tune to a weak station, press 4 / ¢
briefly and repeatedly until you have found
optimal reception.

Programming radio stations

You can store up to a total of 40 radio stations
(FM and MW) in the memory, manually or
automatically (Autostore).
, radio station
is

Autostore: Automatic programming

Automatic programming will start from preset 1
or a chosen preset number. From this preset
number upwards, former programmed tuner
stations will be erased. The set will only program
stations which are not in the memory already.
1
Press the ALBUM/ PRESET buttons once or
more to select the preset number where
programming should start.
Note:
– If no tuner preset number is selected, default is
preset 1 and all your presets will be erased.
2
Press and hold PROGRAM until AUTO
appears
➜
flashes
➜
Available stations are programmed: RDS
stations followed by FM stations, MW stations
(See RDS)
➜
After all stations are stored, the last preset
station will then be played

Manual programming

1
Tune to your desired station (see Tuning to
radio stations)
2
Press PROGRAM to activate programming
➜
flashes
3
Press ALBUM/ PRESET to allocate a number
from 1 to 40 to this station.
4
Press PROGRAM to confirm
➜
Display shows the preset number, waveband
and the frequency of the preset station
5
Repeat steps 1-4 to store other stations
●
You can erase a preset station by
storing another frequency in its place

To listen to a preset station

●
Press the ALBUM/ PRESET buttons once or
more until the desired preset station is displayed.

Tuner

21