Download Print this page
Black Box MT1000A-85-R4 Specification
Black Box MT1000A-85-R4 Specification

Black Box MT1000A-85-R4 Specification

In-line surge protector, csu/dsu, t1, dds (rj-45 8-wire)

Advertisement

Quick Links

In-Line Surge Protector, CSU/DSU, T1, DDS (RJ-45 8-Wire)
Get convenient in-line surge protection for your
ISDN connections.
Put avalanche diode and thyristor
protection where you need it.
Specifications
Application: CSU/DSU, T1, DDS
Ground Wire: Yes
Maximum Shunt Capacitance: <75 pF
Peak Pulse Current: 50 amps
Pins Protected: All
Protection Type: Avalanche diode and thyristor technology
Response Time: <5 ns
Standard Clamping Voltage: 60 volts
Connectors: (2) RJ-45 F
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
BLACK BOX
Overview
This in-line surge protector uses a solid-state design and
multistage hybrid circuits to give maximum protection. It
protects all wires and pins 1, 2, 4, and 5 on the ISDN ST
interface.
What's included
• In-line surge protector
• RJ-45 patch cable
• Specification sheet
For installation instructions, turn this page over...
February 2010
SP060A-R2
MT1000A-85-R4
®

Advertisement

loading

Summary of Contents for Black Box MT1000A-85-R4

  • Page 1 Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Customer FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 Support Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 Information Web site: www.blackbox.com • E-mail: info@blackbox.com BLACK BOX...
  • Page 2 1. Disconnect the RJ-45 line from the equipment you wish to protect. 2. If the equipment you wish to protect is metal, plug the surge protector into the unit and attach the ground wire to the unit’s chassis. If the unit is plastic, connect the ground wire to the electrical outlet ground for the unit.

This manual is also suitable for:

Sp060a-r2