Routing Mode Broadband Internet Settings - Zte EPON SFU Series User Manual

ONU LAN port obtained by the OLT upper layer server. The PC is connected to the
Internet through DHCP, PPPoE, and static ip address.

5.1 Routing mode broadband Internet settings

PPPoE broadband Internet access in routing mode
5.1.1
1. web login ONU and select Network -> WAN -> WAN Connection, and then
set the following parameters:
【Connection name】Select "Create WAN Connection".
【New Connection name】According to own convenience to specify.
【Enable Vlan】This one can be set according to the network planning situation, if
【Vlan ID】The same as "Enable Vlan", Setting depending on the network vlan
【802.1p】Set the priority of vlan, The same as "enable Vlan", depending on the
【Type】select "Route".
【Service List】Select internet. route mode access internet are generally select
【MTU】The default is 1492 does not need to modify; if you meet can ping DNS but
【Link Type】Select "PPPoE".
【Username】Enter the PPPoE Internet PPPoE account provided by the network
the network planning Internet vlan, this one need to check the
"Enable vlan"; If the network is not planning Internet vlan, this one
does not need to check, then ONU is vlan transparent mode.
planning.
network vlan planning to configure. The default priority is 0.
internet.
the web browser can not access the site. Modify MTU smaller, such
as: 1400.
operator.