Table of Contents
Advertisement
Warning
!
Avoid extreme ambient conditions as far as possible. Protect your SIMATIC
PC from dust, moisture, and heat. (Refer to the "System Unit" section in the
Technical Description.)
Mount the device as safely as possible to prevent any danger (for example,
by falling over).
The clearance around the system unit must be at least 200 mm at the front
and rear, so that the system unit is sufficiently ventilated.
Make certain that the ventilation slots for the system unit and the monitor
are not covered.
Make certain that the sliding door in front of the drives is closed during
operation. If the sliding door is not closed, insufficient air is drawn through
the ventilation slots to cool the interior of the system unit.
SIMATIC PC RI25/45
C79000-G7076-C806-01
Starting Up Your PC
2-3
Advertisement
Table of Contents
