Table of Contents
Advertisement
BLUETOOTH CONNECTION AND PLAYBACK
1. Select the main function selector (6) to "PHONO/BT" mode. Then press the bluetooth/phono button (17) to
"BT" position.
2. The bluetooth led indicator (5) will flash which means the bluetooth in non connection/searching mode.
3. Switch on the bluetooth feature of your bluetooth device (such as mobile phone) and select "PTTCSM70BT"
bluetooth equipment to connect.
4. Once connecting is nished and successfully connected, the bluetooth led (5) will be lit.
5. Start to playback your bluetooth device and enjoy music using the main unit.
Remark:
Due to Aux and Phono/BT were designed at the same position of this system. When Aux in jack (36)
plugged by 3.5mm plug. The channel will change to aux automatically and the turntable will stop to rotate
and bluetooth will be disconnected directly. Please ensure the aux jack (36) is not plugged to anything
before playing phono/BT.
REMOTE CONTROL TRANSMITTER
Battery Installation (battery not provided)
The infra-red transmitter requires 2 pc aaa size battery for operation
BUTTON DESCRIPTION
1. OPEN/ CLOSE
2. INFO
3. REC
4. REP/INTRO/RAN
5. PROGRAM
6. PLAY/PAUSE
7. SKIP/SEARCH FORWARD
SKIP/SEARCH BACKWARD Press once to skip to previous tack. Press & hold
8. STOP
9. FOLDER UP /DOWN
10. SOURCE
11. TRACK SEPARATION
www.PyleUSA.com
Press to open or close the cd door
Press to select encoding bitrate
Press to active encoding or recording function
In sd/usb mode, press to active repeat / intro /
random function
In sd/usb mode, press to active programming
function
In sd/usb mode, press once to start playback.
Press again to enter pause mode.
Press once to skip to next track, press & hold to
search forward
to search backward
In sd/usb mode, press to stop playback or cancel
the stored program.
In sd/usb mode, press to select folder up or
down
In sd/usb mode, press to select sd or usb mode
repeatedly
Press to divide the recording track at turntable
or tape one by one during encoding
10
Advertisement
Table of Contents
