Table of Contents
Advertisement
IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Step 3 Repeat the preceding steps to install other LED lights. Connect the LED lights in the same
row in series, as shown in
Figure 8-5 Installing other LED lights
----End
8.2 Installing an In-cabinet Light
Prerequisites
In-cabinet lights have been purchased.
Context
Install an in-cabinet light on the front and rear beams of a cabinet respectively, and install an
in-cabinet light switch on the right of the two beams respectively. Ensure that the in-cabinet
light switches face the cabinet front. This section describes how to install an in-cabinet light
and in-cabinet light switch on the front beam of the cabinet. It also applies to the installation
of the in-cabinet light and in-cabinet light switch on the rear beam of the cabinet.
Procedure
Step 1 Install an in-cabinet light.
1.
Issue 02 (2015-06-30)
Figure
Secure an in-cabinet light mounting bracket to the middle of the front beam using M5
tapping screws, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 (Optional) Installing the Lighting System
8-5.
Figure
8-6.
123
Advertisement
Table of Contents
