Accessories; Water Package; Mist Cooler System - HTC DURATIQ T5 User Manual

HTC DURATIQ

7 Accessories

7.1 Water package

7.1.1 Mist Cooler System

Machines from HTC can be equipped with the Mist Cooler System for efficient cooling of the
grinding tools. The Mist Cooler System is also available as complementary equipment and
can be ordered afterwards.
The Mist Cooler System creates a very finely divided water mist that is distributed on the floor
surface through a nozzle. The system is used to obtain a better performance during grinding,
while it is possible to grind dry and use a standard dust extractor for the dust the arises. This
cools the tools and makes grinding more effective. The Mist Cooler System reduces the risk
of the diamond tools "glazing over".
Under Menu —
Cooler System to switch off when the grinding is switched off.
The system uses the water in the tank. When the water level is low, the mist symbol changes
colour to yellow.
Grinding
Fill the tank with cold water.
Start the Mist Cooler System by pressing the
button on the control panel, Control panel
(HMI) page 22
system is active, the symbol on the display
for the Mist Cooler System is lit. See
Information Panel page
The water quantity can be adjusted using
the +/- buttons, see Control panel (HMI)
page 22.
D004753, 01.01
Settings — Operation
position 8. When the
24 position 1.
www.htc-floorsystems.com
you can set an auto mode, which allows the Mist
Accessories
43