Specifications; System Requirements - Targus SUPERSPEED USB 3.0 Quick Start Manual

Contents
• Targus USB 3.0 SuperSpeed Dual
Video Docking Station
• SuperSpeed USB 3.0 cable
• Driver CD
• AC power adapter
• DVI to VGA and HDMI to DVI
Adapters

Specifications

• Dual video ports (1 x DVI-I, 1 x HDMI)
• 2 x USB 3.0 ports (support battery
charging specification version 1.1)
• 4 x USB 2.0 ports
• Gigabit Ethernet
• Audio In/Out ports
• Security lock slot
• 6.5A AC adapter
• 0.6m USB 3.0 cable

System Requirements

Hardware
• PC with an Intel Pentium
® ®
equivalent
• CD-ROM drive
• USB 3.0 or 2.0 port
• AC power outlet
Operating System (any of the following)
• Mircosoft Windows Vista
®
Pack 1 (32/64-bit)
• Mircosoft Windows XP with Service
®
Pack 2 or 3
• Mircosoft Windows 7 (32/64-bit)
®
2
processor or
with Service
Windows XP/Vista Setup
® ®
NOTE: DO NOT CONNECT THE DOCKING STATION PRIOR TO INSTALLING THE DISPLAYLINK DRIVER.
1) Install the included Driver CD.
2) Double click on Setup.exe.
Windows 7 Setup
®
1) Connect the Docking Station to your
laptop.
2) Windows will start installing the DisplayLink
Driver automatically.
NOTE: If the driver installation does not automatically start, discon-
nect the docking station from your laptop, insert the Driver CD, and
click on the Setup.exe file.
Docking Station Diagram
USB to
USB 3.0 Port
DVI-I
Laptop Port
AC Power
Adapter
USB 3.0 Port
Lock Slot
Audio In Audio Out
3) Follow the on-screen instructions
until the installation is complete.
4) Connect the Docking Station and
peripherals.
3) Follow the on-screen instructions
until the installation is complete.
4) Connect all peripheral devices.
USB 2.0 Ports
HDMI
Gigabit DVI to VGA Adapter
Ethernet
USB 2.0 Port
HDMI to DVI-DAdapter
3