Sealed Enclosures - Kicker Solo-Baric L7 Series Owner's Manual

Sealed Enclosures

TS Series enclosures combine KICKER's award winning
Solo-Baric subwoofers with computer designed and
human-fine-tuned enclosures to offer a level of bass
performance never before thought possible from a
commercially available, ready-to-install subwoofer system. The
TS Series enclosures are available with a 10 inch S10L7
pre-loaded.
To get all the amazing performance potential from your new
enclosure, you need to follow some basic rules. Take a minute to
completely read through these instructions, then you will be on
the road and pounding.
KICKER TS enclosures are designed to fit behind the seat of a
pickup truck. They are engineered to provide the best bass
response when firing into the back of the truck seat.
Plug your subwoofer speaker wires into the terminals; the red
connectors are positive and the black connectors negative. Hook
the other end of these wires to your subwoofer amplifier in
accordance with its owners' manual;
NOTE: This enclosure is wired internally to make a 4 Ohm load
at the terminals.
Door Frame
solobaric L7 Enclosures
Floor Board
Pick Up Seat
5