Basic Functions; Switching To Standby/On And Selecting Functions; Switch To Eco Power/ On; Auto-Standby - Philips WAS700/05 User Manual

Basic functions

Switching to standby/on and
selecting functions
1
When the set is on, press STANDBY-ON/
ECO POWER to switch it to standby (or y
on the remote control)
➜
The screen dims out. Display shows Center
Status screen and the number of centers found
➜
The Center Status screen is empty if no
center is found
2
To switch on, press STANDBY-ON/ ECO
POWER on the set
➜
The set switches to the last source selected.
OR
On the remote control, press the source button
(e.g. Tuner/Aux, Center).
3
To select your function, press SOURCE once
or more on the set (or Center, Tuner/Aux on
the remote control)
Switching to Eco power/ on
In the power-saving Eco power mode, the set's
display and Wi-Fi connection are turned off.
1
When the set is on, press and hold STANDBY-
ON/ ECO POWER to switch it to Eco
power (or y on the remote control).
➜
The display is switched off.
2
To switch on, press and hold STANDBY-ON/
ECO POWER (or y on the remote control)
or press and hold SOURCE on the set
➜
The set switches to the last source selected.
Helpful hints:
– In the standby/Eco power mode, the settings of
networking, sound, display, language and CD
recording, the tuner presets, and the volume level
(maximum: the moderate level) will be retained in
the set's memory.
18

Auto-standby

●
When the set has reached the end of playback/
recording and remains in the stop position for
more than 5 minutes, the set will switch to
standby automatically to save power.

Volume control

1
Check the playback starts.
2
Adjust the volume with VOL +/- buttons.
➜
Display shows the volume bar, indicating the
volume level.

MUTE

During playback, you can temporarily switch off
the sound without switching off the set.
1
Press MUTE to switch off the sound.
➜
The icon appears. Playback continues
without sound.
2
To switch on the sound, press MUTE again or
adjust the volume with VOL +/-
➜
The icon disappears