Table of Contents
Related Manuals for Curtis TXSG Series
Summary of Contents for Curtis TXSG Series
- Page 1 USER GUIDE 1 and 1.5 Gallon Thermal Servers 1.5 gallon version shown Style varies See brewer user guide for brewing instructions READ AND SAVE THESE INSTRUCTIONS NOTICE TO INSTALLER: Please leave this booklet with the machine.
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS Symbols This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER - Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING - Indicates a hazardous situation which, if not avoided, could result in death or serious injury. - Page 3 IMPORTANT SAFEGUARDS CE Requirements • This dispenser must be used in locations where it can be overseen by trained personnel. • • • This dispenser must not be cleaned by water jet. • instruction concerning use of the dispenser in a safe way and if they understand the hazards involved. •...
-
Page 4: Cleaning Instructions
To avoid damage, DO NOT use a brush to clean the faucet or the inside of the faucet shank (outlet). Cleaning the Container TXSG Series Prepare a mild solution of detergent and warm water. Remove the server from the brewer and Washer remove the lid. - Page 5 CLEANING INSTRUCTIONS Cleaning the Faucet Parts and Gauge Glass (cont.) Sanitize - After rinsing, place all faucet and gauge parts in a sink to be sanitized. Immerse them in a commercial sanitizer suitable for food grade applications. Sanitize according to the WASH directions on the package.
-
Page 6: Rough-In Drawings
ROUGH-IN DRAWINGS RD76 TXSG15 - Thermal Server ø 9.11 in [23.2 cm] 22.85 in [58.0 cm] 3.38 in 7.32 in [8.6 cm] 8.89 in [18.6 cm] [22.6 cm] 2.04 in [5.2 cm] 9.02in 14.38 in [22.9 cm] [36.5 cm] TXSG01 - Thermal Server ø... -
Page 7: Illustrated Parts List
ILLUSTRATED PARTS LIST IP125 TXSG - Exploded View Orange, decaf. handle TXSG, ILLUSTRATED PARTS/RECOMMENDED PARTS 040819C... - Page 8 DL/L/WC-1803 WC-64079 UNITS) WC-32005ORG HANDLE, FAUCET STYLIZED ORG CURTIS WC-1906 “C” RING .917 X .760 X .090 TT-3 TC’S * If server is equipped with a screw-on type cap, replace entire lid assembly (Item 2A or 2B). ** Compatible with older versions.
-
Page 9: Product Warranty
Return Merchandise Authorization (RMA): All returned equipment must be properly re-packaged in the original carton and received by Curtis within 45 days following the issuance of a RMA. NO UNITS OR PARTS WILL BE ACCEPTED WITHOUT A RETURN MERCHANDISE AUTHORIZATION (RMA).