Frequency response
Signal/noise ratio
Audio distortion + noise
Channel separation
Dynamic range
Audio out (analog audio)
Load impedance
Video out
Load impedance
7
Troubleshooting
Warning
•
Risk of electric shock. Never remove the casing of the player.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using the player, check the following points before
requesting service. If the problem remains unsolved, register your player and get support
at www.philips.com/welcome.
No power
•
Ensure that both plugs of the mains cord are properly connected.
•
Ensure that there is power at the car cigarette lighter or AC outlet.
No sound
•
Ensure that the AV cable is connected correctly.
Distorted picture
•
Clean the disc. With a clean, soft, lint-free cloth, wipe the disc outwards from
the center.
•
Make sure that the video output format of the disc is compatible with the TV.
•
Change the video output format to match your TV or program.
•
The LCD is manufactured using high precision technology. You may, however,
see tiny black points and/or bright points(red, blue, green) that continuously
appear on the LCD. This is a normal result of the manufacturing process and
does not indicate a malfunction.
20Hz-20KHz ± 1dB
80 dB
-80 (1KHz)
80 dB
80 dB
Output level: 2V ± 10%
10 K
Output level: 1Vp - p ± 20%
75
EN
21