Assembling The Stand - JVC LT-55NQ7105A User Manual

Assembling the Stand

NOTE:
Make sure the AC cord is not connected to an AC outlet.

Before beginning this process, make sure that you have a clean, safe, and cushioned

space to work at to avoid any damage to the unit.
Do not touch or press the TV screen, the glass might break under pressure.

1. Carefully place the TV screen face-down on a clean, cushioned surface.
2. Insert and secure the stands (R and L) with 2 screws (supplied) each side as shown.
Screw size:M4 x 20 mm
3. Important: Insufficient tightening or incorrect installation
of the stand will not support your TV correctly, and could result in damage or injury from
tip-over.
Stand Installation
L
R
A
1
A-R
2
B
C
4
C
B
A-L