Operating; Starting The Device; Main Menu - Ignition WAL-L412 BP User Manual

Operating

7 Operating

7.1 Starting the device

7.2 Main menu

WAL-L412 BP
34
LED spotlight
Connect the device to the power supply to start operation. After a few seconds the unit is
ready for use.
Press [MODE] to activate the main menu. Use [UP] or [DOWN] to select a submenu. When the
display shows the desired submenu press [SET] to open it up. To close the main menu, press
[MODE]. The selected or entered values tatekeffect immediately
Press for 3 seconds to establish a wireless DMX connection. If no connection is established,
no wireless DMX signal is being received.
All previously made settings are retained even when you disconnect the device from the
power grid. To restart with default values, use the function 'Factory' .
The following table shows the setting options.