Table of Contents
Advertisement
Add Default Type
Delete
DDE Server User's Guide
Step 3. Next, select the generic device from the Configured Device Types list, and
click the Function Codes button to add the functions codes supported by this device
type. Setting up the register groups for a device type is mandatory; you may also
enter an optional mnemonic list. To do this, you'll need to have on hand a complete
protocol reference for the device before proceeding.
Entering the name of a new device type in the Enter Device Type Name box enables
the Add Default Type button. Names may be up to 20 alphanumeric characters long
and cannot include embedded spaces or special characters, such as + * / /, ? () " '.
Click on this button to add your new device type. You will need to do further
configuration after creating a new device type. See the Register Map section for
details on defining the device type's register map.
The standard device types may not be deleted, so this button is grayed when a
standard device type is selected. Only generic (user-defined) device types may be
deleted. Select a user-defined device type and click Delete to delete that device type.
Chapter Six - Advanced Options • • • • 67
Advertisement
Table of Contents
