Playback Features; Starting Disc Playback; Basic Playback Controls; Pausing Playback - Philips DVP3126K/61 User Manual

Starting disc playback

A
Turn on the TV to the correct program
number for the DVD player (e.g. 'EXT',
'0', 'AV').
Press STANDBY-ON 2 to turn on
B
the DVD player.
Press OPEN/CLOSE ç on the front of
C
the DVD player.
You can also hold down the STOP
button on the remote control to open
and close the disc tray.
D
Place a disc into the disc tray with the
label facing up, then press OPEN/
CLOSE ç.
For double-sided discs, load the side
which you want to play facing up.
E
Playback may start automatically.
If not, press PLAY/PAUSE u.
See the following pages for more
playback options and features.
Helpful Hints:
– Do not overturn the DVD player while disc
loading, playing or ejecting.
– Do not close the disc tray manually even if
the power switched off.
– The operating features described in the
following pages might not be possible for
certain discs. Always refer to the instructions
supplied with the discs.

Playback Features

Basic playback controls

Unless otherwise stated, all operations
described are based on Remote Control
use.

Pausing playback

A
During playback, press PLAY/PAUSE
u to pause playback and display a still
picture.
Sound will be muted.
B
To resume normal playback, press
PLAY/PAUSE u again.

Selecting title/chapter/track

Press PREV í / NEXT ë to go to
the previous or next title/chapter/track.
Press DISPLAY to display the disc
information text line for title/chapter/
track (example - 00/08).
Use the numeric keypad 0-9 to enter
valid title/chapter/track number, then
press OK.
The playback skips to the selected
title/chapter/track.

Stopping playback

Press STOP .
Helpful Hints:
– Screen saver will start automatically if the
disc playback is stopped for about 5 minutes.
– The player will automatically switch to
Power Standby mode if you do not press any
buttons for about 15 minutes after the disc
has stopped playing.
21