Audio Setup Page; Analog Output - Philips DVP3982/37B User Manual

Setup Menu Options

Audio Setup Page

Analog Output

Digital Audio Setup
6
dvp3962_3982_37_eng1.indd 36
(continued)
(underlined options are the factory default settings)
This setting is only required if you have connected the audio
output of this unit to a stereo device or TV using the analog
output jack.
{ LT/RT }
{ Stereo }
{ V SURR }
This setting is only required if you have connected the audio
output of this unit to an amplifier/receiver using the digital
output jack.
{ Digital Output }
– The connected device has a built-in
Dolby Pro Logic decoder. It can deliver
the surround sound through the two
speakers.
– The connected device can only output
stereo audio through two speakers.
– For virtual surround sound effects.
– { Off }
Disable digital audio output. Select this
if you are using the analog audio jacks
to connect this unit to a TV or Stereo
system.
{ All }
The connected device supports multi-
channel audio formats. The digital audio
format will be output as on disc.
{ PCM Only }
The connected device does not support
multi-channel formats. All audio signals
are downmixed to PCM format
(-channel).
2008-05-05 2:17:57 PM