Option 3: Using An Accessory Rf Modulator - Philips DVP1120/37B User Manual

Basic Connections
TV
Option 3: Using an accessory
RF modulator
Use this connection if your TV has only a
single Antenna Input jack (labeled as
75 ohm or RF In).
A
Connect the audio/video cables (supplied)
from the VIDEO AUDIO L/R jack on
this unit to the video input jack (yellow)
and Audio In jacks (red/white) on the RF
modulator.
B
Connect a RF coaxial cable (not supplied)
from the ANTENNA OUT or TO TV
jack on the RF modulator to the
ANTENNA IN jack on your TV.
C
Connect the Antenna or Cable TV
service signal (not supplied) to the
ANTENNA IN or RF IN jack on the RF
modulator. (It may have been connected
to your TV previously. Disconnect it
from the TV.)
14
1_dvp1120_37_eng 8.indd 14 1_dvp1120_37_eng 8.indd 14
(continued)
Antenna
Helpful Hint:
– See your electronics retailer for details
about RF modulator availability and
operations.
Back of RF Modulator
(example only)
2008-01-18 1:16:17 PM 2008-01-18 1:16:17 PM