Philips DVP3350K/55 User Manual page 28

[ Analog Output ]
Select the analog audio setting based on
the audio device that is connected through
the analog audio jack.
[ Stereo ] – for stereo output.
[ LT/RT ] – for surround sound output
through two speakers.
[ Digital Audio ]
Select the setting based on the digital
through the digital jack.
[ Digital Output ] – select the type of
digital output.
Option Description
[ Off ] Disable digital output.
[ All ] The device supports
multi-channel audio
formats.
[ PCM Only ] The device is not capable
of decoding multi-channel
audio. Audio is
downmixed to two-
channel sound: see
LPCM Output ]
[ LPCM Output ] – select the LPCM
(Linear Pulse Code Modulation) output
sampling rate.
Option Description
[ 48kHz ] For discs recorded at
sampling rate of 48 kHz.
[ 96kHz ] For discs recorded at the
sampling rate of 96 kHz.
Note
[ LPCM Output ] setting is only available if the
[ Digital Output ] is set to [ PCM only ].
The higher the sampling rate, the better the sound
quality.
[ Volume ]
Set the default volume level when you play
a disc.
1.
2.
3.
[ Sound Mode ]
Select a preset sound effect to enhance
the audio output.
[ CD Upsampling ]
For better sound quality in stereo mode,
convert the music CD to a higher sampling
rate.
[
setting.
Press OK.
Press to set the volume.
Press OK
[ 3D ] – select a virtual surround sound
effect that is produced from the left and
right audio channels.
[ Movie Mode ] – select a sound effect
for movies.
[ Music Mode ] – select a sound effect
for music.
[ Off ] – turn off CD-upsampling.
[ 88.2kHz ] – convert to twice the
original sampling rate.
[ 176.4kHz ] – convert to four times
the original sampling rate.
EN 29