Table of Contents
Advertisement
Illustration
Use of the power cable (only USA/Canada)
The machine has a polarized plug (one contact is wider than the other). To reduce the risk of electric shock,
the plug can only be plugged into the socket in one way. If the plug does not fit into the socket, turn the
plug. If it still does not fit, contact an electrician to install an appropriate outlet. Do not modify the plug in
any way.
Foot control (only USA/Canada) (Optional accessory)
Use only foot controller type LV-1 with BERNINA 500.
Name
Spool disc
Bobbin
4 pieces, 1 of them in the
machine
Foam pad
2 pieces
Touchscreen pen
Seam ripper
Screwdriver red (slot)
Brush
Sewing machine oil
Power cable
My BERNINA
Purpose
To support the regular
unwinding of the thread from
the spool.
3 different sizes for thread
spools in different sizes.
To wind the bobbin thread.
To prevent the thread from
slipping under the spool holder,
tangling and breaking.
For precise operation of the
touch display.
To undo seams and to cut
buttonholes open.
To loosen and tighten slotted
screws.
To clean the feed dog and the
looper area.
To oil the machine.
To connect the machine with the
power supply system.
19
Advertisement
Table of Contents
