Table of Contents
Advertisement
Network Update
You can update the software by connecting the unit to the
Internet.
1. Follow steps 1 to 3 in "Disc / SD Card Update" on
page 46.
2. Use [
] to select "Network", then press [OK].
3. Use [
] to select "Yes", then press [OK].
• This unit will then start checking for the latest
software version.
4. Confirmation message will appear. Select "Yes", then
press [OK].
• The unit will start downloading the latest software
version.
5. When the download completes, confirmation message
will appear. Press [OK].
• The unit will start updating the software version.
• It may take a while to complete the update.
6. After updating finishes, this unit will restart
automatically.
C Caution
•
Please do not unplug the AC power cord or LAN cable
while executing the "Network" update.
D Note
•
In order to update the software via the Internet, you
must connect the unit to the Internet and set up
necessary settings.
•
For the network connection, refer to "Connection to
the Network" on page 20.
•
For the network setup, refer to "Network Installation"
on page 41.
•
All settings will remain the same even if you update the
software version.
•
The version of Netflix will also be updated if newer
version of Netflix is available when updating the
software.
12.8. Restore Default Settings
(home) A
"Setup"
Menus to reset player settings, format SD card, local
storage and clear network settings.
1. Use [
] to select "Setup" in the home
menu, then press [OK].
2. Use [
] to select "Advanced Setup", then press
[OK].
3. Use [
] to select "Restore default settings", then
press [OK].
4. Use [
] to select the desired setting, then press
[OK].
"Reset Settings":
All the settings except for the "Parental Control" and
"Network Installation" setting will be reset to default.
"Format SD Card" (Available only when an SD
card is inserted):
Initialize the SD card.
"(Unit) Erase Saved BD-ROM Data":
Clears the data saved for the BD-ROM contents, such
as BD-ROM game scores, on this player.
"(SD Card) Erase Saved BD-ROM Data"
(Available only when an SD card is inserted):
Clears the supplemental data for the BD-ROM
playback, such as subtitle data, from the SD card.
"Reset Network Settings":
Reset the network setting to the default.
5. Use [
] to select "Yes", then press [OK].
• Confirmation message will appear. Press [OK] to
complete the setting.
6. Press [
(home)] to exit.
C Caution
•
Do not remove the SD card while executing the
"Format SD Card" or "(SD Card) Erase Saved
BD-ROM Data". It will damage the card.
D Note
•
"Format SD Card" and "(SD Card) Erase Saved
BD-ROM Data" are not available when a Blu-ray Disc™
is in the unit.
"Advanced
"Restore default
A
A
Setup"
settings"
EN - 47
Advertisement
Table of Contents
