Before Recording; About Temporary Hdd Storage/Time Shift Video Bar - Philips DVDR7250H/05 User Manual

Before Recording

About temporary HDD
storage/Time Shift video bar
The current TV programme will be
stored in the temporary hard disk
storage called 'TSB' (Time Shift Buffer)
once the recorder is turned on. It will
continuously store up to 6 (six) hours of
TV programmes.
The Time Shift video bar will appear on
the TV. It indicates the status and timing
of the TV programmes stored in the
temporary HDD storage. You can
choose to display or remove the video
bar by pressing the INFO m button on
the remote control.
21:00
The Time Shift video bar consists of the
following information:
a The TV programme start time.
Once it has exceeded 6 (six) hours, the
beginning of the contents will be deleted
and the start time will be changed
accordingly.
b Remaining space in the temporary
storage.
c Clips that are selected to be recorded
onto the HDD (marked Red).
d Current position and time of the TV
programme broadcast.
e Title markers (when you switch to a TV
channel for more than 1 minute, a new
title marker will be created)
f Present time
g Programme information
Warning!
The temporary HDD can only store up
to 6 hours of TV programmes. All the
contents will be cleared when you press
STANDBY-ON 2 to turn off the
recorder.
36
In addition, executing the following
actions will also clear the contents in the
temporary HDD storage :
– Press CAM on the remote control.
– Enter to { Setup } or { Record mode }
option in the system setup menu.
i) To proceed and clear the contents in
the temporary HDD storage, press
OK on the remote control to select
{ Yes } in the menu, OR
ii) Select { No } in the menu and press
OK on the remote control to abort.
Marking the contents for recording
23:13
You need to 'mark' the contents in the
temporary HDD storage before it can be
recorded to the hard disk drive (HDD),
see page 39.
To select a title (programme)
Press INFO m to show the overview
panel and use
To fi nd a scene within the title
Use
To record the programme currently
highlighted on the time shift buffer
Press REC
Note: In the countries where no GUIDE
Plus+ TV listings data is available or no such
data is stored, pressing REC will start
recording the current channel from the last
channel marker onwards for the next 6 (six)
hours. Press REC repeatedly to set the
recording length by 30-minute increments.
To mark the start of recording from
the current scene
Press the Red button.
To mark the end of recording
Press STOP
To cancel the marked recording
Press the Red button.
This action will clear the Time Shift Buffer.
Do you want to continue?
Yes
No
keys to select a title.
keys.
once.
.