Philips DVDR5350H/05 User Manual page 25

Hard disk/dvd recorder
Hide thumbs Also See for DVDR5350H/05:
Table of Contents

Advertisement

Step 3: Installation and Set-up
E
The Channel Search menu appears on
then TV. Select { Channel Search } in
the menu and press OK on the remote
control to start
It takes a few minutes to complete.
CHANNEL SEARCH
Automatic Channel search will find and store all channels.
Make sure to connect the antenna.
Channel Search
Skip Search
Note: Make sure you have successfully
made all the required connections to this
recorder, the TV and Satellite Receiver/
Cable Box (if any) and turned them on.
The channel search will detect the signals
and save all the available programme
channels.
If no channels are found :
– Try the auto TV channel installation
after completing the basic setup, see page
78.
F
After the channel search is fi nished, the
total number of found and stored
channels appears, press OK to continue.
CHANNEL SEARCH
Analogue TV channels found: 9
Restart Search
Continue
G
The time and date menu appears.
TIME AND DATE
Please check the Time and If incorrect, navigate
right to correct the Time.
Time
Date
Done
TIPS: After completing the basic installation, you can change or update your settings using the system
setup menu, see page 75~80.
dvdr5350H_UK_Eng2.indd 25
dvdr5350H_UK_Eng2.indd 25
H
Start
OK
I
OK
20:01
31-01-2005
OK
i. If the information is correct, select
{ Done } in the menu and press OK.
ii. If changes are required, use the
alphanumeric keypad 0-9 to enter
the correct time and date in the
respective fi eld.
The basic installation is now completed.
Easy setup completed. Continue with GUIDE Plus+
installation?
Continue
OK
Do not Install now
OK
i. Select { Continue } in the menu and
press OK to start the GUIDE Plus+
installation. See next page for the
complete detailed setup.
ii. Select { Do not install now } in the
menu to skip the GUIDE Plus+
installation. The next time when you
want to install the GUIDE Plus+
system, press GUIDE on the remote
control, see next page.
Wait until the recorder has fi nished
initialising the system, then press OK to
exit.
You may now enjoy using this
recorder.
Helpful Hint:
– The TV programme listings do not appear
on the GUIDE Plus+ system as soon as you
complete the basic installation. It may take
up to 24 hours to receive TV listings data.
(continued)
25
2005-10-10 11:48:45 AM
2005-10-10 11:48:45 AM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvdr5350h

Table of Contents