Hookup Diagrams - Mackie CRDV Owner's Manual

Hookup Diagrams

Connecting a CR8S-XBT to the signal chain is quite easy, so let's take a quick look at a fairly typical setup.
In this example, a computer is connected directly to the subwoofer's RCA inputs. [Note: you could also plug a
source – such as a mixer, smartphone, mp3 player or other signal source – directly into the subwoofer's input(s)].
From here, the L/R outputs from the CR8S-XBT are connected to the inputs of a pair of CR-XBT monitors using
balanced 1/4" TRS connectors.
Now position the subwoofer and monitors where you would like them. Play audio through the computer, making
sure that the volume of the computer, subwoofer and monitors are above "0".
Last step: move the subwoofer and monitors around until the optimal sound has been achieved and adjust volume
to taste.
5
Owner's Manual