a
( Standby-On )
•
Turns on the Home Theater System
or switches to standby mode.
•
When EasyLink is enabled, switches
the Home Theater System and all
EasyLink devices to standby. Note
that you must press and hold
( Standby-On ) for at least 3 seconds
for this to occur.
b
OPEN/CLOSE
•
Opens or closes the disc
compartment.
c Source buttons
•
DISC : Switches to the disc source.
•
USB : Switches to the USB source.
•
RADIO : Switches to FM band.
•
AUDIO SOURCE : Selects an audio
input source.
•
iPod DOCK : Switches to the iPod in
the dock.
d
SETUP
•
Accesses or exits the setup menu.
e
( Navigation buttons )
•
Navigates through the menus.
•
Press left and right for fast backward
or forward search.
•
In radio mode, press up and down to
tune the radio frequency.
•
In radio mode, press left or right to
start auto search.
f
INFO
•
For discs, displays information about
the current status or the disc.
•
For slideshows, displays a thumbnail
view of photo À les.
g
( Play/Pause )
•
Starts, pauses or resumes disc play.
•
In radio mode, automatically tunes
radio stations during À rst-time setup.
h
( Stop )
•
Stops disc play.
•
In radio mode, erases the current
preset radio station.
8
EN
i TREBLE / BASS
•
Selects Treble or Bass mode, then
press
+/- to set the level for
treble or bass output.
j Numeric buttons
•
Selects an item to play.
k AUDIO SYNC
•
Selects an audio language or channel
on a disc.
•
Press and hold to access the setting
for audio sync, then press
set the audio delay time.
•
In radio mode, toggles between FM
stereo and FM mono.
l SOUND MODE
•
Selects a predeÀ ned sound effect.
m REPEAT / PROGRAM
•
Selects or turns off repeat or shufÁ e
mode.
•
In radio mode, resets the list of
preset stations: press to manually
reset; press and hold to automatically
reset.
n OK
•
ConÀ rms an entry or selection.
o
BACK
•
Returns to a previous screen.
•
For DVD, goes to the title menu.
•
For VCD version 2.0 or SVCD with
PBC turned on, returns to the menu
during playback.
p
/
( Previous/Next )
•
Skips to the previous or next title,
chapter, or track.
q
( Mute )
•
Mutes or restores audio output.
r
+/-
•
Increases or decreases volume.
s AMBISOUND
•
Selects stereo sound output or
multi-channel surround output.
+/- to