Philips HTS6510/05 Quick Start Manual

1 Connect
A Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
Place the Ambisound speakers at the normal
listening ear level, equal distance from the TV and
face straight ahead towards the listening area.
B
Place the subwoofer on the floor, at least one
metre away from the TV.
B
Connect the radio antennas
Keep the antennas away from the electronic devices to
prevent unwanted interference.
12 mm
C
B
FM/MW ANTENNA
~
MAINS
MW
SUB- FRONT FRONT
WOOFER RIGHT LEFT
L
FM 75
R
HDMI OUT
A
DVD System (rear)
A
Connect the FM antenna to the FM socket. Extend
the wire and fix its end to the wall.
B
Unfold the AM/MW loop antenna and fix the claw
into the slot.
C
Push the tabs and insert the wires into the AM/MW
sockets.
C
Connect the Ambisound speakers
and subwoofer
Connect the left speaker to the FRONT LEFT socket,
right speaker to the FRONT RIGHT socket and the
subwoofer to the SUBWOOFER socket at the rear of
the DVD system.
SUBWOOFER
FRONT
FRONT
RIGHT LEFT
SUB- FRONT FRONT
WOOFER RIGHT LEFT
FM/MW ANTENNA
~
MAINS MW
SUB- FRONT FRONT
WOOFER RIGHT LEFT
L
FM 75
R
HDMI OUT
DVD system (rear)
Ensure that this portion is
fully inserted in to the
socket.
D Connect the DVD system to TV
Television ( rear)
SCART IN
To off-air
SCART IN
antenna or
set-top box
FM/MW ANTENNA
~
MAINS MW
SUB- FRONT FRONT
WOOFER RIGHT LEFT
L
FM 75
R
HDMI OUT
DVD System (rear)
A
Use the supplied scart cable to connect the SCART
socket on this DVD system to the SCART IN socket
on your TV.
B
Plug in the power cable from the DVD system to an
AC power outlet.
Note It is important to connect the DVD system
directly to your TV. When watching the TV
programmes, you can press TV on the remote control
to get the sound output from the speakers system.
E Connect the audio from other
device to DVD system (optional)
Use the red and white audio cables (not supplied) to
connect the AUX IN (R/L) sockets on this DVD system
to the AUDIO output sockets on your Audio/Video
device (for example, DVD recorder, VCR).
Television ( rear)
AUDIO
OUT
AUDIO OUT
AUDIO
OUT
AUDIO IN
b
FM/MW ANTENNA
~
MAINS
MW
SUB- FRONT FRONT
WOOFER LEFT RIGHT
L
FM 75
R
HDMI OUT
DVD System (rear)
Note Press AUX/DI on the remote control to get
the sound output from the speakers system when
watching the TV programme.
2 Set up
A
Finding the viewing channel
A
Press STANDBY ON on the DVD system.
B
Press SOURCE on the DVD system until "DISC"
appears on the display panel.
C
Turn on the TV. Use the TV's remote control to
select the correct viewing channel for the DVD
system.
You should see the blue DVD background on the
TV.
Note To search for the correct viewing channel,
press the Channel Down button on the TV's remote
°
control repeatedly (or AV, SELECT, button) until
you see the blue DVD background.
B
Setting up the Ambisound speakers
A
Press and hold SOUND on the remote control to
enter the Ambisound speaker settings mode.
B
Use keys to view the available settings (ROOM
ACOUSTICS, SPEAKER DISTANCE, LISTENING
POSITION) and press OK to select.
C
Use keys to select a most suitable predefined
setting and press OK to confirm.
ROOM ACOUSTICS
HARD - for concrete/glass walls.
SOFT - for wooden walls.
SPEAKER DISTANCE
NEAR - 'X' is less than 1 metre.
DEFAULT - 'X' is between 1~2.5 metres.
FAR - 'X' is more than 2.5 metres.
LISTENING POSITION
NEAR - 'Z' is less than 1.5 metre.
DEFAULT - 'Z' is between 1.5~2.5 metres.
FAR - 'Z' is more than 2.5 metres.
Note The underlined options are the default setting.