Connect Your Home Theater; Speakers - Philips HTS3531/55 User Manual

o CREATE MP3/ZOOM
•
Access the create MP3 menu.
•
Zoom into a video scene or picture. Press
the Navigation buttons (left/right) to
select a zoom factor.
p SCREEN FIT
Fit the picture format to the TV screen.
q SUBTITLE
Select subtitle language for video.
r AUDIO SYNC
•
Select an audio language or channel.
•
Press and hold to access audio delay
setting, then press +/- to delay the audio
to match the video.
s SURR
Select surround sound or stereo sound.
t (Stop)
Stop play.
u (Play/Pause)
Start, pause or resume play.
v INFO
Access more play options while playing a disc
or a USB storage device.
SETUP
w
Access or exit the setup menu.
SLEEP
x
Switch the home theater to standby mode
after the elapsed time.
EasyLink controls
With Easylink, you can control your home theater
and the TV with the following buttons on your
home theater remote control (see 'EasyLink' on
page 14).
•
(Standby-On): Press and hold to switch
your home theater, TV and the connected
devices to standby.
•
(Play/Pause): When a video disc is in
the disc compartment, wake up the TV from
standby, and then play a disc.
EN
6
4 Connect your home
theater
This section helps you connect your home theater to
a TV and other devices.
For information about the basic connections of your
home theater and accessories, see the quick start
guide. For a comprehensive interactive guide, see
www.connectivityguide.philips.com.
Note
•
For identification and supply ratings, refer to the type
plate at the back or bottom of the product.
•
Before you make or change any connections, make
sure that all devices are disconnected from the
power outlet.

Speakers

Position, connect, and set up your speakers for
best surround sound.
Position
Speaker position plays a critical role in setting up a
surround sound effect.
For best results, place your speakers and the
subwoofer as shown below.