Setting Detector Parameter Sets - Siemens FS720 Commissioning, Maintenance, Troubleshooting

A - Commissioning standalone 'Station' without PC
6

Setting detector parameter sets

6.3 Setting detector parameter sets
40 | 178
Building Technologies
Fire Safety
1. Select 'Topology' > ↑ 'Detection tree' > ↑ 'Area' > ↑ 'Section' > ↑ 'Zone' >
'Detect.' in the main menu.
2. Press the 'More Options' ↑ softkey.
3. Select 'Execute commands'.
4. Select the corresponding command:
– 'Select PS MANNED'
– 'Select PS UNMANNED'
– 'Select PS'
5. Select the desired ↑ parameter set.
a The following message is displayed: 'Command executed'
A6V10210416_j_en_--
2018-08-29