Philips HTS3568DW/75 Quick Start Manual page 46

Sound
No sound.
No sound on HDMI
connection.
No sound from TV
programme.
Play
DivX video fi les cannot be
played.
The aspect ratio of the
screen is not aligned with
the TV display setting.
DivX subtitle are not
displayed correctly.
The contents of the USB
fl ash drive cannot be read.
The indicator on the
wireless transmitter blinks
continuously for more than
one minute.
EN
46
• Ensure that the audio cables are connected and press the
correct input source (for example, AUX/DI /MP3 LINK, USB) to
select the device you want to play.
• You may not hear any sound from the HDMI output if the
connected device is non-HDCP compliant or only DVI-
compatible.
• Connect an audio cable from the AUDIO input on this unit to
the AUDIO output on your TV. Then press AUX/DI /MP3
LINK repeatedly to select the corresponding audio input source.
• Ensure that the DivX fi le is encoded according to the 'Home
Theatre Profi le' with the DivX encoder.
• Ensure that the DivX video fi le is complete.
• The aspect ratio is fi xed on the DVD.
• Ensure that the subtitle fi le name is the same as the movie fi le
name.
• Select the correct character set.
1. Press OPTIONS.
2. Press B, then select [ DivX Subtitle ] in the menu.
3. Select the character set that supports the subtitle.
• The USB fl ash drive format is not compatible with this unit.
• Drive is formatted with different fi le system which is not
supported by this unit (e.g. NTFS).
• Turn off and on the Home Theatre unit and wireless receiver.
Press and hold the CONNECT button on the transmitter for 5
•
seconds, then release.