Preferences - Philips HTS3568/98 User Manual

[ System Audio
Enable auto switching of
Control ] audio input to the active
device and output the
sound from its speakers
system.
• To enable this feature,
select [ On ]. Then
proceed to [ HDMI
Input Mapping ] to
scan and map all the
connected devices.
[ HDMI Input
Map the audio input to
Mapping ] the connected TV/
devices correctly to
enable automatic
switching of input source.
1. Press OK to start
scanning of devices.
2.
Select the audio input
to map (e.g. AUX1,
AUX2), then press B.
3.
Select the correct
device that connected
to this audio input,
then press OK.
Note
•
Your TV and other connected devices must be
compliant with HDMI CEC.
•
You must turn on the HDMI CEC operations on
your TV/devices before you can enjoy the EasyLink
controls. See your TVs/devices manual for details.
•
Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
[ Closed Caption ]
Turn on or off display captions.
• [ On ] – show the sound effects in
subtitle. Only applicable to disc with
Closed Caption information included
and your TV supports this feature.
• [ Off ] – disable closed caption.

Preferences

1
Press OPTIONS.
[ General Setup ] menu is displayed.
2
Press V to select
press B.
3
Select an option, then press OK.
Preferences
Audio
Subtitle
Disc Menu
Parental
PBC
MP3/JPEG Nav
Password
DivX Subtitle
• See the explanations of the above
options in the following pages.
4
Select a setting, then press OK.
• To return to the previous menu, press
BACK.
• To exit the menu, press OPTIONS.
[ Preferences ], then
39
EN