Video Clip - D-Link DCS-935L User Manual

Section 4 - Configuration
The Video Clip option allows you to send video clips via FTP or e-mail when a trigger is activated. (Triggers are activated by either motion or sound
detection.)

Video Clip:

Check this box to enable the Video Clip function.
Trigger By:
Select Motion to record video when motion is detected, or select Sound to
record video when sound is detected.
Only During:
Check the box by Only During to set a schedule for recording video. Then check
the box(es) to select a day or days, and choose a starting and ending time from
the drop-down menus.
Video Clip: Here you can specify how many seconds of video to record before and after the
event.
Target: Select where you want the video clip to be sent. It may be uploaded to an FTP
server or sent to an e-mail address.
Click Save Settings to save your changes.
D-Link DCS-935L User Manual
Video Clip
41