Cleaning And Maintenance - Morphy Richards MR47082 Instructions Manual

47076MEE-Rev1-Q6 19/9/08
6
9:29 am Page 6
Adjustable warming
plate temperature
• This coffee maker gives you the
option of adjusting the Stay Warm
Setting to slightly reduce the
temperature of the coffee after it
has brewed.
• When brewing the coffee, a steady
orange light will appear on the
'warmer' button. In order to reduce
the Stay Warm setting, push the
'warmer' button once, and the
steady orange light will then blink.
• This setting should be used when
the carafe is half full or less, to
ensure the coffee quality is
maintained.
• The Stay Warm setting will continue
to operate as long as the unit is ON
and will shut off automatically after
two hours.
• When you begin to brew a new pot
of coffee, the steady orange light
will reappear, indicating the
Coffeemaker will maintain the
temperature of the higher Stay
Warm Setting.
Coffee quality indicator
• To help you to decide if your coffee
is likely to be of a good quality
during keep warm mode, bars on
the outside of the clock face
indicate how long ago the coffee
was brewed.
B
CLEANING AND
MAINTENANCE
Locating the filter
1 To remove the filter holder, lift by
using the two handles either side to
clean. (See cleaning).
2 To refit, place the removable filter
holder into the top of your coffee
maker. Ensure that the cut out on
the filter holder lines up with the
slot at the back of the product.
3 Then place the permanent mesh
filter inside the filter holder.
Descaling
• If you live in a harder water area, we
recommend that your coffee maker
is descaled at regular intervals, eg.
every 2 - 3 months. In areas of
moderately hard water you should
descale every 6 months.
• If the water filters through more
slowly than usual, it is a sign that
descaling is necessary.
• We recommend you to use
proprietary liquid descaler which is
B
especially made for coffee makers
and plastic kettles. Follow the
instructions on the bottle or sachet,
and them operate the coffee maker
with just water 3 times before
making coffee.
• Do not use kettle descaler unless
the packet specially states it is
suitable for coffee makers.
NOTE: The permanent mesh filter
should not be used during
descaling.
Cleaning care
Unplug the coffee maker, and allow
to cool.
Do not immerse the coffee maker in
liquid.
Rinse the water tank occasionally
with cold water. Do not use a cloth
as any residue or lint left behind
may clog the coffee maker.
Remove the permanent filter discard
used coffee and wash with warm
soapy water. Extended soaking