Table of Contents
Advertisement
H
Y
our TV can automatically set itself for
local area (or Cable TV) channels. This
makes it easy for you to select only the TV
stations in your area when the CHANNEL
(+), (–) buttons are pressed.
Note: Make sure the antenna or cable signal
connection has been completed before AUTO
PROGRAM is activated.
1
Press the MENU button on the
remote to show the on-screen menu.
2
Press the CURSOR UP
buttons to scroll through the on-
screen menu until the word INSTALL
is highlighted.
3
Press the CURSOR RIGHT
ton to display the INSTALL menu
features.
4
Press CURSOR UP
buttons to scroll the Install features
until the words AUTO PROGRAM
are highlighted.
5
Press the CURSOR RIGHT
ton to start the Auto Program scanning
of channels. Auto Programming will
store all available channels in the TV's
memory then tune to the lowest avail-
able channel when done.
6
When finished, press the STATUS
/EXIT button to remove the menu
from the TV's screen.
H
ELPFUL
When CABLE is selected, channels 1-125
are available.
When ANTENNA is selected, channels 2-
69 are available.
When AUTO is selected, the TV will auto-
matically set itself to the correct mode
based on the type of signal it detects when
the AUTO PROGRAM feature is activated.
A
OW TO
UTOMATICALLY
or DOWN
but-
or DOWN
but-
H
INT
P
ROGRAM
2
4
1
VOL
2
4
13
C
HANNELS
6
3
5
Advertisement
Table of Contents
