D-Link DNS-1550-04 Quick Installation Manual page 8

3.4 Installing the DNS-1550-04 in a Rack Enclosure
To install the DNS-1550-04 in a rack enclosure:
1. Assemble the two front mounting ears by using two M4 handle screws on the left and
right sides of the chassis as shown in the figure below. Affix the right and left ears to
the enclosure using two ear screws.
2. Position the DNS-1550-04 in the rack enclosure. Use the rack attaching screws
provided by the rack's manufacturer to attach the two front DNS-1550-04 mounting
ears to the rack enclosure as shown in the figure below.
8
Ear
Handle
Ear screw #6-32*4 (X2)
Enclosure
Rack
Enclosure
Screw
D-Link DNS-1550-04 Quick Installation Guide
Handle screw M4*10 (X2)
Pack attaching
screws
Enclosure
Inside of
post
Rack front
post